NSN 5306-01-689-0030 · NIIN 016890030 · FSC 5306
NO DASHES 5306016890030
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Application: C-5 918S AIRCRAFT
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.291 AND INCHES MAXIMUM 1.321 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 260000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 51.0 AND ROCKWELL C MAXIMUM 54.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,DOUBLE HEXAGON TENSION,LIGHTWEIGHT,0.0312 OVERSIZE 260 KSI MIN UTS,900 DEG F |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.431 |
| AGAV | END ITEM IDENTIFICATION | C-5 918S AIRCRAFT |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.2500 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.428 AND INCHES MAXIMUM 0.438 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.297 AND INCHES MAXIMUM 0.312 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2797 AND INCHES MAXIMUM 0.2807 |
| ABQZ | INTERNAL DRIVE STYLE | |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | OVERALL NICKEL AND CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S2416 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.304 AND INCHES MAXIMUM 0.313 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| MATT | MATERIAL | OVERALL STEEL COMP H11 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.875 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.224 AND INCHES MAXIMUM 0.244 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S6487 |