ATLASAir Supply

321-252-9430Mon–Fri · 8a–6p ET
Quote0 Request a Quote →
Home / MS parts / Fasteners & Fastening Hardware / NSN 5306-01-736-2872
NSN 5306-01-736-2872  ·  NIIN 017362872  ·  FSC 5306
NO DASHES 5306017362872
In Stock

BOLT,CLOSE TOLERANCE

Bolts

Application: C-5

Technical characteristics

27 rows

Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.

MRCRequirementValue
AASATHREAD LENGTHINCHES NOMINAL 0.665
CQBCMINIMUM TENSILE STRENGTHPOUNDS PER SQUARE INCH 260000
THSDTHREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)
CMLPTHREAD QUANTITY PER INCH20
AAJFTHREAD DIRECTIONRIGHT-HAND
AASBFASTENER LENGTHINCHES MINIMUM 2.900 AND INCHES MAXIMUM 2.930
AASKHEAD STYLE
AASUHEAD HEIGHTINCHES MINIMUM 0.345 AND INCHES MAXIMUM 0.365
AATBWIDTH BETWEEN FLATSINCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.502
AATCEXTENDED WASHER DIAMETERINCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.750
MATTMATERIALOVERALL STEEL COMP H11
ABQJPOINT STYLE
AGAVEND ITEM IDENTIFICATIONC-5
AHYMNOMINAL THREAD DIAMETERINCHES 0.4375
CXCYPART NAME ASSIGNED BY CONTROLLING AGENCYBOLT, DOUBLE HEXAGON TENSION, LIGHTWEIGHT, .0156 OVERSIZE 260 KSI MIN UTS, 900 DEGREE F
CBBLFEATURES PROVIDEDCETYL ALCOHOL LUBRICANT
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONOVERALL NATIONAL STD SINGLE TREATMENT RESPONSE A-S 2416
AAURGRIP DIAMETERINCHES MINIMUM 0.4516 AND INCHES MAXIMUM 0.4526
AAUYPOINT LENGTHINCHES NOMINAL 0.060
CWDKPOINT CHAMFER ANGLEDEGREES NOMINAL 45.0
PRPYPROPRIETARY CHARACTERISTICSPACS
SFTTSURFACE TREATMENTOVERALL NICKEL AND CADMIUM AND CHROMATE
ANEEGRIP LENGTHINCHES NOMINAL 2.250
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONOVERALL AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S 6487
AATDEXTENDED WASHER THICKNESSINCHES MINIMUM 0.089 AND INCHES MAXIMUM 0.109
AAJDTHREAD CLASS3A
CQFMHARDNESS RATINGOVERALL ROCKWELL C MINIMUM 51.0 AND ROCKWELL C MAXIMUM 54.0