NSN 2835-01-155-3188 · NIIN 011553188 · FSC 2835
NO DASHES 2835011553188
In Stock
SHAFT,TURBINE,NONAIRCRAFT GAS TU
Gas Turbines and Jet Engines; Non-Aircraft Prime Mover, Aircraft Non-Prime Mover, and Components
Application: 2350-01-061-2445
Technical characteristics
6 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES NOMINAL 4.969 |
| AGAV | END ITEM IDENTIFICATION | 2350-01-061-2445 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 35.0 AND ROCKWELL C MAXIMUM 42.0 |
| FEAT | SPECIAL FEATURES | ALL CHARACTERISTICS DATA PROPRIETARY; SURFACE FINISH 16.0 MICROINCH ON PLAIN END; 32.0 MICROINCH INTERNAL; 250.0 MICROINCH EXTERNAL; EXTERNAL FLANGE ON RIGHT END; 0.938 IN. DIA; 0.125 IN. THICK; 4 SHOULDERS 2 UNDERCUTS BETWEEN ENDS; SMALLEST DIA 0.625 IN.; LARGEST DIA 0.6692 MIN 0.6695 MAX IN.; ONE 0.664-32UNS 3A THREADED SHOULDER; FLAT KEYWAY LOCATED ON SHOULDER BEHIND FLANGE; 0.791 IN. LG; 0.1895 MIN 0.1915 MAX IN. W; 0.0822 MIN 0.0875 MAX IN. DEPTH; INTERNAL FLAT ROOT; SIDE FIT; INVOLUTE SPLINE DATA: 11 TEETH; 0.3438 IN. PITCH DIA; 0.5 IN. PITCH FRACTION; 0.2977 IN. BASE CIRCLE DIA; 30 DEG PRESSURE ANGLE; 0.375 IN. MIN FORM DIA; 0.045 IN. WIRE SIZE; 0.2955 IN. MAX LG BETWEEN 2 WIRES; 0.001 IN. MAX PROFILE VARIATION; 0.0003 IN. MAX LEAD VARIATION; ARMY COGNIZANT SERVICE |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5643 AND MIL SPEC SINGLE MATERIAL RESPONSE -IL-H-6875 |