NSN 3020-00-210-1288 · NIIN 002101288 · FSC 3020
NO DASHES 3020002101288
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.000 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.375 |
| AAQL | BODY STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.174 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.031 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.187 |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.1250 |
| AJLA | TEETH QUANTITY | 45 |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | OVERALL BRINELL STANDARD MINIMUM 240.0 AND BRINELL STANDARD MAXIMUM 285.0 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | AXIALLY THROUGH BODY FIRST END COUNTERBORED 1 AND PLAIN 2 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 AND ASSN STD SINGLE MATERIAL RESPONSE AISI TO SAE 1137 AND ASSN STD SINGLE MATERIAL RESPONSE AISI TO SAE 1144 |
| STYL | STYLE DESIGNATOR | |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | AXIALLY THROUGH BODY FIRST END INCHES 0.375 |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | AXIALLY THROUGH BODY FIRST END INCHES 0.110 |