NSN 5340-01-509-8226 · NIIN 015098226 · FSC 5340
NO DASHES 5340015098226
In Stock
BRACKET,DOUBLE ANGLE
Hardware, Commercial
Application: ASDS RESIDUAL
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 1.000 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 1.000 |
| AGAV | END ITEM IDENTIFICATION | ASDS RESIDUAL |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 1.250 |
| AHLG | SECOND LEG CORNER RADIUS | INCHES NOMINAL 0.380 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.404 AND INCHES MAXIMUM 0.411 |
| AHLN | SECOND LEG HOLE DIAMETER | INCHES MINIMUM 0.404 AND INCHES MAXIMUM 0.411 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.500 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.470 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.125 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.125 |
| AHPZ | CENTER SECTION HEIGHT | INCHES NOMINAL 6.880 |
| AHQA | CENTER SECTION WIDTH | INCHES NOMINAL 1.250 |
| AHQB | CENTER SECTION THICKNESS | INCHES NOMINAL 0.125 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 1.250 |
| AHQP | FIRST LEG CORNER RADIUS | INCHES NOMINAL 0.380 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.750 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.470 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| CSSR | SECOND LEG ANGLE | DEGREES NOMINAL 90.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, MAG SWITCH, UPPER |
| FEAT | SPECIAL FEATURES | BOTTOM/CENTER SECTION IS CURVED SLIGHTLY-SEE DRAWING FOR DETAILS; CENTER SECTION HAS 2 SLOTS, 0.260 W X 0.640 L, CENTERED 0.750 FROM FRONT EDGE AND 1.570 & 5.810 FROM LEFT EDGE |
| MATT | MATERIAL | NICKEL ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE ASTA- B443, INCONEL-625, CONDITION ANNEALED |
| STYL | STYLE DESIGNATOR |