NSN 2920-00-294-2606 · NIIN 002942606 · FSC 2920
NO DASHES 2920002942606
In Stock
REGULATOR,ENGINE GENERATOR
Engine Electrical System Components, Nonaircraft
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABVG | MOUNTING SLOT LENGTH | INCHES NOMINAL 0.469 |
| ADZC | ENVIRONMENTAL PROTECTION | WATERTIGHT |
| ANPP | OUTPUT VOLTAGE RATING IN VOLTS | MINIMUM 7.2 AND MAXIMUM 7.4 |
| CSCF | TERMINAL TYPE | LOCATION NOT OTHERWISE SPECIFIED SCREW |
| ABTD | MOUNTING SLOT WIDTH | INCHES NOMINAL 0.344 |
| ANYK | CURRENT REGULATOR UNIT QUANTITY | 1 |
| ADNY | DISTANCE BETWEEN HOLES ALONG LENGTH | INCHES MINIMUM 5.995 AND INCHES MAXIMUM 6.005 |
| ANYD | SYSTEM GROUND POLARITY | NEGATIVE |
| ANYE | VOLTAGE REGULATOR UNIT TYPE | WIRE WOUND COIL |
| ABFF | FURNISHED ITEMS | REVERSE CURRENT OVERLOAD CIRCUIT BREAKER |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.339 AND INCHES MAXIMUM 0.349 |
| ANYS | CUT-IN VOLTAGE RATING | MINIMUM 6.5 AND MAXIMUM 7.0 |
| APAT | CENTER TO CENTER DISTANCE BETWEEN SLOTTED HOLES ALONG LENGTH | INCHES MINIMUM 5.995 AND INCHES MAXIMUM 6.005 |
| APAW | CENTER TO CENTER DISTANCE BETWEEN SLOTTED HOLES AND PLAIN HOLES ALONG WIDTH | INCHES MINIMUM 5.183 AND INCHES MAXIMUM 5.193 |
| AARA | TERMINAL QUANTITY | 3 |
| ANYZ | CUTOUT CURRENT RATING IN AMPS | MINIMUM 0.5 AND MAXIMUM 6.0 |
| ANZE | TERMINAL ENCASEMENT | NOT ENCASED |
| ANYH | VOLTAGE REGULATOR UNIT QUANTITY | 1 |
| ANYR | CIRCUIT CONTROL DEVICE TYPE | CUTOUT RELAY |
| ANYJ | CURRENT REGULATOR UNIT TYPE | WIRE WOUND COIL |
| ADER | MOUNTING STYLE | |
| ANYC | SYSTEM VOLTAGE RATING | 6.0 |
| ANYP | OUTPUT CURRENT RATING IN AMPS | MINIMUM 39.0 AND MAXIMUM 41.0 |
Supersedes
This item replaces cancelled NIINs 003608081 · 004284729. An older drawing citing one of those numbers resolves here.