NSN 3020-00-782-0071 · NIIN 007820071 · FSC 3020
NO DASHES 3020007820071
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANTP | BORE STYLE | |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 1.125 |
| AAQL | BODY STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 4620 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.126 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.390 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.374 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.875 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.781 |
| STYL | STYLE DESIGNATOR | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.625 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.6000 |
| AJLA | TEETH QUANTITY | 52 |
| CWNH | TOOTH FORM | STANDARD |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.700 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.437 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.437 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7493,CO- 4620 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 45.0 AND ROCKWELL C MAXIMUM 60.0 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.063 |