NSN 6680-00-795-2787 · NIIN 007952787 · FSC 6680
NO DASHES 6680007952787
In Stock
SHAFT ASSEMBLY,FLEXIBLE
Liquid and Gas Flow, Liquid Level, and Mechanical Motion Measuring Instruments
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJYP | SCREW THREAD SERIES DESIGNATOR | SECOND END UNF |
| AKMH | CORE DIAMETER | INCHES NOMINAL 0.150 |
| ANQR | PROTECTIVE COATING METHOD | CORE COATED |
| AAJF | THREAD DIRECTION | BOTH ENDS RIGHT-HAND |
| ABFF | FURNISHED ITEMS | SECOND END SETSCREW |
| MATT | MATERIAL | CORE STEEL |
| SCSZ | CROSS SECTION SIZE | ACROSS FLATS SECOND END INCHES MINIMUM 0.101 AND INCHES MAXIMUM 0.104 |
| SCSZ | CROSS SECTION SIZE | DIAMETER FIRST END INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.153 |
| SFTT | SURFACE TREATMENT | CASING CADMIUM |
| SFTT | SURFACE TREATMENT | CORE ZINC |
| ZZZV | FSC APPLICATION DATA | TACHOMETER,ARMORED CAR |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| APJC | THREAD LOCATION | BOTH ENDS INTERNAL |
| APTD | END TYPE | FIRST END ROUND KEYED |
| APTD | END TYPE | SECOND END SQUARE MALE |
| ASDB | WIDTH ACROSS FLATS | FIRST END INCHES NOMINAL 1.000 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 175.078 AND INCHES MAXIMUM 175.391 |
| AECT | THREAD DEPTH | FIRST END INCHES NOMINAL 0.327 |
| AECT | THREAD DEPTH | SECOND END INCHES NOMINAL 0.375 |
| AEDN | TIP LENGTH | FIRST END INCHES MINIMUM 0.734 |
| AEDN | TIP LENGTH | SECOND END INCHES MAXIMUM 0.922 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | FIRST END UNS |
| AAJD | THREAD CLASS | 2B |
| CFSL | CORE REMOVABILITY | NONREMOVABLE |
| MATT | MATERIAL | CASING STEEL |
| CFRX | OVERALL END SIZE | FIRST END: 1.188 IN. W; SECOND END: 0.875 IN. W |
| CFRZ | CORE OVERALL LENGTH | INCHES MINIMUM 175.047 AND INCHES MAXIMUM 175.359 |
| CFRR | CASING PROTECTIVE DEVICE TYPE | RUBBER COVER |
| CFRP | CASING LENGTH BETWEEN FERRULES | INCHES NOMINAL 173.937 |
| CFRQ | CASING OUTSIDE DIAMETER | INCHES NOMINAL 0.688 |
| AWZY | END CONNECTION TYPE | BOTH ENDS THREADED INTERNAL |
| BPPL | WRENCHING FACILITY TYPE | BOTH ENDS HEXAGON |
| ASDB | WIDTH ACROSS FLATS | SECOND END INCHES NOMINAL 0.750 |
Supersedes
This item replaces cancelled NIIN 006896096. An older drawing citing one of those numbers resolves here.