NSN 5315-00-350-0196 · NIIN 003500196 · FSC 5315
NO DASHES 5315003500196
In Stock
PIN,STRAIGHT,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
15 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.130 AND INCHES MAXIMUM 0.150 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| AAZP | CHAMFER LENGTH | INCHES MINIMUM 0.078 AND INCHES MAXIMUM 0.109 |
| ABMZ | DIAMETER | INCHES MINIMUM 0.431 AND INCHES MAXIMUM 0.436 |
| ABPB | UNDER HEAD LENGTH | INCHES MINIMUM 1.609 AND INCHES MAXIMUM 1.641 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TY 2,CL 2 |
| CRRG | PIN HEAD DIAMETER | INCHES MINIMUM 0.547 AND INCHES MAXIMUM 0.578 |
| HGTH | HEIGHT | INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.172 |
| MATT | MATERIAL | OVERALL STEEL |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| CQPJ | PIN CHAMFER ANGLE | DEGREES MINIMUM 13.0 AND DEGREES MAXIMUM 17.0 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 0.160 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL SUPERFICIAL 15-N MINIMUM 89.0 AND ROCKWELL SUPERFICIAL 15-N MAXIMUM 91.0 |
| STYL | STYLE DESIGNATOR | |
| AASK | HEAD STYLE |
Supersedes
This item replaces cancelled NIIN 004940165. An older drawing citing one of those numbers resolves here.