NSN 5990-00-937-1089 · NIIN 009371089 · FSC 5990
NO DASHES 5990009371089
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 85.0 |
| ABXF | SHAFT LENGTH | REAR SHAFT INCHES MAXIMUM 0.3910 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 153.00 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 300.00 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 292.0 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.8118 AND INCHES MAXIMUM 0.8123 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 210.00 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 11.8 |
| ABXF | SHAFT LENGTH | FRONT SHAFT INCHES MINIMUM 0.3590 |
| AAQL | BODY STYLE | |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 13.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 30.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -15.0 TO 15.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 9.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.00 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0330 AND INCHES MAXIMUM 0.0540 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.1790 |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 650.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 126.00 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 90.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 2.029 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 5 |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 10.0 |
| AJSL | BODY SIZE | 10 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | FRONT SHAFT INCHES MINIMUM 0.0895 |
| ABWV | SHAFT DIAMETER | REAR SHAFT INCHES MAXIMUM 0.0900 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 41.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 41.00 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.7600 AND INCHES MAXIMUM 1.8120 |