NSN 5905-00-903-5189 · NIIN 009035189 · FSC 5905
NO DASHES 5905009035189
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.907 AND INCHES MAXIMUM 1.989 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED UPPER ADJACENT SIDE TWO ROWS |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.05700 AND INCHES MAXIMUM 0.06700 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 35351-737330-01 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.870 AND INCHES MAXIMUM 0.880 |
| ABPC | UNDERCUT WIDTH | INCHES MAXIMUM 0.78100 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.870 AND INCHES MAXIMUM 0.880 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.406 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 2.0 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.62500 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 3600.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.10 TO 0.10 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.05700 AND INCHES MAXIMUM 0.06700 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 128.00 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.563 AND INCHES MAXIMUM 1.583 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 0.87000 AND INCHES MAXIMUM 0.88000 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -3.0 TO 3.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 3600.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.60 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.50 |
| AEDX | SHAFT STYLE | |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |