NSN 2520-00-737-3716 · NIIN 007373716 · FSC 2520
NO DASHES 2520007373716
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAUB | HOLE DIAMETER | INCHES NOMINAL 0.812 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 2 AND UNTHREADED HOLE(S) 6 |
| BBCF | SECOND END SPLINE QUANTITY | 16 |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| BNYS | FLANGE OVERALL THICKNESS | INCHES NOMINAL 1.000 |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | INCHES NOMINAL 0.406 |
| MATT | MATERIAL | STEEL COMP 5160 |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 41.360 AND INCHES MAXIMUM 41.391 |
| ABUJ | THREAD SIZE | 3/8-16 |
| AHTC | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 4.672 AND INCHES MAXIMUM 4.688 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AMGA | SECOND END SPLINE LENGTH | INCHES NOMINAL 1.406 |
| AMGF | SECOND END PITCH DIAMETER | INCHES NOMINAL 1.313 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE SAE 5160 |