NSN 3020-00-580-9541 · NIIN 005809541 · FSC 3020
NO DASHES 3020005809541
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 32 |
| ANTP | BORE STYLE | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.500 |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE |
| STYL | STYLE DESIGNATOR | |
| CWTR | HUB STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.166 |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.2500 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 2 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.312 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.600 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.350 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.250 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.250 |
| AJLA | TEETH QUANTITY | 40 |
Supersedes
This item replaces cancelled NIIN 006072360. An older drawing citing one of those numbers resolves here.