NSN 5905-00-820-0833 · NIIN 008200833 · FSC 5905
NO DASHES 5905008200833
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 3 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABNB | FIRST FLAT LENGTH | INCHES MINIMUM 0.422 AND INCHES MAXIMUM 0.454 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.312 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 320.0 |
| ABNC | FLAT HEIGHT | INCHES MINIMUM 0.211 AND INCHES MAXIMUM 0.221 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.249 AND INCHES MAXIMUM 0.250 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 1.016 |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 200.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.50 TO 0.50 |
| CQPH | DEVICE DESIGN TYPE | AT 12:00 OCLOCK |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 5.0 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -2.0 TO 2.0 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 2.125 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 2.218 |
| AEDX | SHAFT STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.312 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 2.00 |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516 |