NSN 5310-01-121-8517 · NIIN 011218517 · FSC 5310
NO DASHES 5310011218517
In Stock
NUT,PLAIN,ROUND
Nuts and Washers
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABQU | DRIVE POINT DEPTH | INCHES NOMINAL 0.125 |
| ACTA | NUT STYLE | |
| ACTD | NUT DIAMETER | INCHES NOMINAL 6.250 |
| ADBG | NUT THICKNESS | INCHES NOMINAL 0.375 |
| ADBH | DRIVE POINT WIDTH | INCHES NOMINAL 0.375 |
| ADBM | DRIVE POINT QUANTITY | 4 |
| AGGP | DRILLED HOLE DIAMETER | INCHES MINIMUM 0.047 AND INCHES MAXIMUM 0.056 |
| ALET | HOLE TYPE AND QUANTITY | DRILLED 4 |
| BZRR | THREAD SERIES | UNF |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQJX | NOMINAL THREAD SIZE | INCHES 5.750 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES MINIMUM 109.75 AND DEGREES MAXIMUM 110.25 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 7075 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 9,T73 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-A-200 TO 11,T73 OR T73510 OR T73511 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |