NSN 5306-01-186-9077 · NIIN 011869077 · FSC 5306
NO DASHES 5306011869077
In Stock
BOLT,INTERNALLY RELIEVED BODY
Bolts
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.225 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.565 AND INCHES MAXIMUM 1.575 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES NOMINAL 0.875 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.310 |
| AASY | DISTANCE FROM CENTERLINE TO FLAT | INCHES MINIMUM 0.370 AND INCHES MAXIMUM 0.375 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.270 AND INCHES MAXIMUM 1.288 |
| AAVK | SHOULDER LENGTH | INCHES MINIMUM 0.655 AND INCHES MAXIMUM 0.670 |
| AAXC | CONCENTRIC HOLE DIAMETER | INCHES MINIMUM 0.375 AND INCHES MAXIMUM 0.377 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.562 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 180000 |
| FEAT | SPECIAL FEATURES | SLOT IN POINT 0.290 IN. DEPTH,0.125 IN. MIN DIA,0.130 IN. MAX DIA; UNDERCUT BETWEEN HEAD AND SHOULDER 0.100 IN. NOM WIDTH,0.610 IN. MIN DIA,0.615 IN. MAX DIA; UNDERCUT BETWEEN SHOULDER AND POINT 0.075 IN. NOM WIDTH,0.470 IN. MIN DIA,0.480 IN. MAX DIA |
| MATT | MATERIAL | OVERALL STEEL COMP E4340 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-8844 |
| STYL | STYLE DESIGNATOR | |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |