NSN 5365-01-110-8141 · NIIN 011108141 · FSC 5365
NO DASHES 5365011108141
In Stock
RING,EXTERNALLY THREADED
Bushings, Rings, Shims, and Spacers
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASG | CASEHARDENING INDICATOR | NOT CASE-HARDENED |
| AATE | CHAMFER ANGLE IN DEG | 45.0 |
| AAZP | CHAMFER LENGTH | INCHES NOMINAL 0.060 |
| ABFF | FURNISHED ITEMS | SETSCREW LOCKING NOTCH |
| ABGL | WIDTH | INCHES NOMINAL 0.380 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.585 AND INCHES MAXIMUM 0.595 |
| ABPZ | END RADIUS | INCHES NOMINAL 0.120 |
| ABQA | TAPER MINOR DIAMETER | INCHES MINIMUM 5.000 AND INCHES MAXIMUM 5.005 |
| ABQB | TAPER MAJOR DIAMETER | INCHES NOMINAL 5.130 |
| ABUJ | THREAD SIZE | 5.875-16 |
| AEJZ | DEPTH | INCHES NOMINAL 0.160 |
| AGZD | BORE SHAPE | TAPERED |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT (UNJ) |
| AKCV | DRIVE TYPE | SLOTTED FACE |
| AWHW | ACCOMMODATION TYPE AND QUANTITY | SLOTS 4 |
| AWPF | ANGLE BETWEEN ACCOMMODATIONS IN DEG | 90.0 |
| AWPJ | TAPER MAJOR DIAMETER LOCATION | DRIVE END |
| AWQA | BORE EDGE PROCESS | CHAMFERED AND ROUNDED |
| AWQB | PROCESS END LOCATION | DRIVE END AND END OPPOSITE DRIVE END |
| MATT | MATERIAL | ALUMINUM ALLOY 7049 OR ALUMINUM ALLOY 7050 OR ALUMINUM ALLOY 7075 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD 1ST MATERIAL RESPONSE A-S 411, T73 OR ASSN STD 2ND MATERIAL RESPONSE A-S 4108, T73652 OR ASSN STD 2ND MATERIAL RESPONSE A-S 4050, T73651 OR FED SPEC 3RD MATERIAL RESPONSE QQ-A-225 TO 9, ALLOY 7075, T73 |