NSN 5315-01-112-8101 · NIIN 011128101 · FSC 5315
NO DASHES 5315011128101
In Stock
PIN,GROOVED,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AASK | HEAD STYLE | |
| ABMZ | DIAMETER | INCHES MINIMUM 0.623 AND INCHES MAXIMUM 0.624 |
| ABNZ | EFFECTIVE LENGTH | INCHES NOMINAL 1.177 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.585 AND INCHES MAXIMUM 0.595 |
| ABPB | UNDER HEAD LENGTH | INCHES NOMINAL 1.780 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.090 |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.189 AND INCHES MAXIMUM 0.190 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.271 AND INCHES MAXIMUM 1.273 |
| ASDB | WIDTH ACROSS FLATS | INCHES NOMINAL 0.880 |
| CRRG | PIN HEAD DIAMETER | INCHES NOMINAL 1.000 |
| CSYM | SURFACE FINISH | SHANK END MICROINCHES 32.0 |
| FEAT | SPECIAL FEATURES | 0.375 IN. DIA BY 1.125 IN. DP CONCENTRIC HOLE IN SHANK END ON AXIAL CENTERLINE |
| HGTH | HEIGHT | INCHES NOMINAL 0.220 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 7075 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 9 T73 OR T7351 OR FED SPEC SINGLE MATERIAL RESPONSE QQ-A-200 TO 11 T73 OR T73510 OR T73511 |
| STYL | STYLE DESIGNATOR |