NSN 5990-00-435-1930 · NIIN 004351930 · FSC 5990
NO DASHES 5990004351930
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| CQTM | TERMINAL LOCATION | REAR |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 16.200 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.0315 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.8123 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0315 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 40.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0380 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 192.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 40.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 160.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 45.00 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 0.8123 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.6550 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 595.00 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.454 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 25.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 49.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 328.0 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3750 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES NOMINAL 0.8123 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.2800 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 105.00 |
| AJSL | BODY SIZE | 10 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.9360 AND INCHES MAXIMUM 0.9370 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES NOMINAL 0.8123 |