NSN 4720-01-134-8823 · NIIN 011348823 · FSC 4720
NO DASHES 4720011348823
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
43 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.125 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 300.0 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.234 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.234 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.437 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 8.000 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 1.656 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | FIRST END INCHES NOMINAL 1.656 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 1.656 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | FIRST END INCHES NOMINAL 1.656 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AFQN | FLANGE LENGTH | FIRST END INCHES NOMINAL 2.188 |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 2.188 |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 2.188 |
| AGFF | FLANGE WIDTH | FIRST END INCHES NOMINAL 2.188 |
| AHNC | CONNECTION STYLE | |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.266 |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES NOMINAL 0.266 |
| AJED | RAISED FACE HEIGHT | FIRST END INCHES NOMINAL 0.062 |
| AJED | RAISED FACE HEIGHT | SECOND END INCHES NOMINAL 0.062 |
| AJEE | RAISED FACE DIAMETER | FIRST END INCHES NOMINAL 1.854 |
| AJEE | RAISED FACE DIAMETER | SECOND END INCHES NOMINAL 1.854 |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | SECOND END RAISED FACE FLANGE |
| AWLS | CONNECTION TYPE | FIRST END RAISED FACE FLANGE |
| CBBL | FEATURES PROVIDED | REUSABLE END FITTINGS |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 2000.0 |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQGM | MAXIMUM OPERATING PRESSURE | POUNDS PER SQUARE INCH 500.0 |
| CQQF | OPERATING PRESSURE | SINGLE RESPONSE POUNDS PER SQUARE INCH (PSI) MAXIMUM 500 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 1300.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 45.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 36.610 |
| CTCJ | FLANGE STYLE | |
| FEAT | SPECIAL FEATURES | ONE INLET ON ELBOW END |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
Supersedes
This item replaces cancelled NIIN 008215187. An older drawing citing one of those numbers resolves here.