NSN 5990-00-487-0135 · NIIN 004870135 · FSC 5990
NO DASHES 5990004870135
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0310 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6910 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 75.00 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 10.2 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 35.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 405.00 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.1660 AND INCHES MAXIMUM 2.1820 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0570 AND INCHES MAXIMUM 1.0650 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 20.00 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.0900 AND INCHES MAXIMUM 0.0960 |
| CQRG | BODY MATERIAL | ALUMINUM |
| CQTM | TERMINAL LOCATION | SIDE |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0310 |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1873 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.4750 AND INCHES MAXIMUM 0.4950 |
| AJSL | BODY SIZE | 11 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.0125 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 1.0350 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 31.20 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 5.000 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 40.00 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 20.00 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | MILLIMETER-MILLIGRAMS NOMINAL 214.000 |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | NOMINAL 80.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 25.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.5 TO 5.5 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | NOMINAL 316.00 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.200 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.9700 AND INCHES MAXIMUM 0.9750 |
| AAQL | BODY STYLE | |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | NOMINAL 82.00 |
Supersedes
This item replaces cancelled NIIN 001106964. An older drawing citing one of those numbers resolves here.