NSN 5305-00-017-7398 · NIIN 000177398 · FSC 5305
NO DASHES 5305000177398
In Stock
SCREW,MACHINE
Screws
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | INCHES NOMINAL 0.875 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.195 AND INCHES MAXIMUM 0.211 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.489 AND INCHES MAXIMUM 0.500 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.781 AND INCHES MAXIMUM 0.875 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 60000 |
| CQFM | HARDNESS RATING | ROCKWELL B MINIMUM 95.5 AND ROCKWELL B MAXIMUM 100.0 |
| CYAU | SCREW MATERIAL | STEEL |
| CYAW | SCREW MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE SAE GR 1 OR 2 |
| CYBA | SCREW SURFACE TREATMENT | CADMIUM OR ZINC |
| CYBE | SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED SPEC 1ST TREATMENT RESPONSE QQ--416,TY 1,CL 3 OR FED SPEC 2ND TREATMENT RESPONSE QQ-Z-325,TY 1,CL 3 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
Supersedes
This item replaces cancelled NIIN 003606882. An older drawing citing one of those numbers resolves here.