NSN 4720-00-768-9828 · NIIN 007689828 · FSC 4720
NO DASHES 4720007689828
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
38 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.232 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | FIRST END INCHES NOMINAL 1.320 |
| AJED | RAISED FACE HEIGHT | SECOND END INCHES NOMINAL 0.016 |
| AJEE | RAISED FACE DIAMETER | FIRST END INCHES NOMINAL 1.500 |
| AJEE | RAISED FACE DIAMETER | SECOND END INCHES NOMINAL 1.500 |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END RAISED FACE FLANGE |
| AWLS | CONNECTION TYPE | SECOND END RAISED FACE FLANGE |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND INTERNAL SUPPORT |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 4200.0 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.031 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 7.375 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | FIRST END INCHES NOMINAL 1.320 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | SECOND END INCHES NOMINAL 1.320 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | SECOND END INCHES NOMINAL 1.320 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AFQN | FLANGE LENGTH | FIRST END INCHES NOMINAL 1.855 |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1000.0 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.232 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES NOMINAL 0.264 |
| AHNX | BOLT HOLE DIAMETER | SECOND END INCHES NOMINAL 0.264 |
| CTCJ | FLANGE STYLE | |
| FEAT | SPECIAL FEATURES | FIRST @END FITTING HAS A SIDE OUTLET 1.312-12 UN 2A THREAD 37 DEG SEAT |
| AGFF | FLANGE WIDTH | SECOND END INCHES NOMINAL 1.855 |
| AJED | RAISED FACE HEIGHT | FIRST END INCHES NOMINAL 0.016 |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.875 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -100.0 AND FAHRENHEIT 450.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL WORKING 21.750 |
| AFQN | FLANGE LENGTH | SECOND END INCHES NOMINAL 1.855 |
| AGFF | FLANGE WIDTH | FIRST END INCHES NOMINAL 1.855 |
| AHNC | CONNECTION STYLE |
Supersedes
This item replaces cancelled NIIN 006703286. An older drawing citing one of those numbers resolves here.