NSN 5315-01-194-9353 · NIIN 011949353 · FSC 5315
NO DASHES 5315011949353
In Stock
PIN,SHOULDER,HEADED
Nails, Machine Keys, and Pins
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGZ | FIRST END STYLE | |
| AASK | HEAD STYLE | |
| AASY | DISTANCE FROM CENTERLINE TO FLAT | INCHES MINIMUM 0.579 AND INCHES MAXIMUM 0.589 |
| ABPB | UNDER HEAD LENGTH | INCHES NOMINAL 2.322 |
| ABPR | FIRST STEP DIAMETER | INCHES MINIMUM 0.7480 AND INCHES MAXIMUM 0.7485 |
| ABPS | FIRST STEP LENGTH | INCHES MINIMUM 1.820 AND INCHES MAXIMUM 1.830 |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.2435 AND INCHES MAXIMUM 0.2500 |
| ABPU | SECOND STEP LENGTH | INCHES NOMINAL 0.492 |
| ABRB | HOLE ARRANGEMENT STYLE | |
| ABRC | FIRST HOLE DIAMETER | INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.086 |
| ABRE | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | INCHES NOMINAL 0.172 |
| AMCS | FIRST END TAPER LENGTH | INCHES MINIMUM 0.040 AND INCHES MAXIMUM 0.070 |
| CRMG | FIRST END TAPER ANGLE | DEGREES NOMINAL 45.0 |
| CRRG | PIN HEAD DIAMETER | INCHES NOMINAL 1.350 |
| FEAT | SPECIAL FEATURES | HEAD HAS PROTRUSION ALONG FLAT 0.164 IN. W AND 0.060 IN. H ALONG FLAT; 2ND STEP THREADED 0.250-28 UNJF 3A TO GROOVE 0.191 IN. DIA AND 0.108 IN. W; HEAD DRILLED 0.404 IN. MIN AND 0.411 IN. MAX DIA TO 1.390 IN. DP |
| HGTH | HEIGHT | INCHES NOMINAL 0.120 |
| MATT | MATERIAL | OVERALL STEEL UNS K23080 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6411 OR ASSN STD SINGLE MATERIAL RESPONSE CO- K23080 |
| SFTT | SURFACE TREATMENT | SHANK CHROMIUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SHANK MFR REF SINGLE TREATMENT RESPONSE S13102,CL B,FSC- 76301 |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 012692252. An older drawing citing one of those numbers resolves here.