NSN 2010-01-136-0655 · NIIN 011360655 · FSC 2010
NO DASHES 2010011360655
In Stock
SHAFT,PROPULSION,SHIP
Ship and Boat Propulsion Components
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAZR | MAJOR DIAMETER | INCHES NOMINAL 3.000 |
| ABET | THREAD LENGTH | INCHES 3.812 |
| ABGL | WIDTH | INCHES MINIMUM 0.997 AND INCHES MAXIMUM 0.998 |
| ABHP | OVERALL LENGTH | FEET NOMINAL 20.559 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 4.250 |
| ABND | TAPER LENGTH | FEET NOMINAL 0.687 |
| ABQB | TAPER MAJOR DIAMETER | INCHES NOMINAL 4.250 |
| ABRR | KEYWAY WIDTH | INCHES MINIMUM 0.997 AND INCHES MAXIMUM 0.998 |
| ABRV | KEYWAY DEPTH | INCHES MINIMUM 0.309 AND INCHES MAXIMUM 0.312 |
| AEJZ | DEPTH | INCHES MINIMUM 0.309 AND INCHES MAXIMUM 0.312 |
| AEVE | KEYWAY QUANTITY | 1 |
| AGYE | SURFACE FINISH | SMOOTH MACHINED |
| AMCD | INTERMEDIATE BEARING SLEEVE OUTSIDE DIAMETER | INCHES NOMINAL 4.750 |
| AMCE | INTERMEDIATE BEARING SLEEVE LENGTH | FEET NOMINAL 1.083 |
| APQB | UNIT TYPE | PROPELLER SHAFT SECTION |
| BPJZ | USAGE LOCATION | PORT/STARBOARD |
| CBME | CUBIC MEASURE | CUBIC INCHES 17280.000 |
| CPHM | FORWARD END DESIGN | TAPERED |
| CPJH | FORWARD END COUPLING DESIGN | DETACHABLE |
| CPJJ | FORWARD END COUPLING TYPE | FLANGE |
| CPJK | FORWARD END COUPLING OUTSIDE DIAMETER | INCHES NOMINAL 11.000 |
| CPJL | FORWARD END COUPLING LENGTH | FEET NOMINAL 9.250 |
| CPJM | FORWARD END COUPLING THICKNESS | INCHES NOMINAL 1.000 |
| CPNC | FORWARD END TAPER LENGTH | FEET NOMINAL 0.500 |
| CPNG | FORWARD END MAJOR DIAMETER | INCHES NOMINAL 2.500 |
| CPNH | FORWARD END THREAD QUANTITY | PER INCH 4 |
| CPNJ | FORWARD END THREAD LENGTH | INCHES 2.250 |
| CPTC | AFTER END DESIGN | TAPERED |
| CPTF | FORWARD BEARING SLEEVE OUTSIDE DIAMETER | INCHES NOMINAL 4.750 |
| CPTG | FORWARD BEARING SLEEVE LENGTH | FEET NOMINAL 1.000 |
| CPTH | AFTER BEARING SLEEVE OUTSIDE DIAMETER | INCHES NOMINAL 5.000 |
| CPTP | AFTER BEARING SLEEVE LENGTH | FEET NOMINAL 1.333 |
| CPTT | FORWARD END TAPER MAJOR DIAMETER | INCHES NOMINAL 3.875 |
| CQCF | CONSTRUCTION | SOLID |
| CQRN | THREAD QUANTITY | PER INCH 4 |
| CTJS | UNPACKAGED UNIT WEIGHT | POUNDS NOMINAL 400.000 |
| CTKF | TAPER | PER FOOT IN INCHES NOMINAL 0.750 |
| CTMS | FORWARD END TAPER | PER FOOT IN INCHES NOMINAL 0.750 |
| MATT | MATERIAL | STEEL |
| NMBR | QUANTITY | 1 |