NSN 3020-00-761-6972 · NIIN 007616972 · FSC 3020
NO DASHES 3020007616972
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWTG | COUNTERBORE NOMINAL DIAMETER | SECOND END INCHES 2.440 |
| AAQL | BODY STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 4.700 |
| CWNH | TOOTH FORM | STANDARD |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 6 OR QUALITY NUMBER 7 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 34.0 AND ROCKWELL C MAXIMUM 38.0 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.375 |
| CWRS | BORE NOMINAL DIAMETER | FIRST END INCHES 2.219 |
| CWTB | COUNTERBORE NOMINAL DEPTH | SECOND END INCHES 1.249 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.5000 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ-Z-325,TYE,CLASS2 |
| STYL | STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| FEAT | SPECIAL FEATURES | BORE GROOVED 0.089 IN. W,2.570 IN. DIA,0.040 IN. FROM 1ST END,PILOT HOLE 0.187 IN. DIA LOCATED THRU GEAR BODY 1.651 IN. FROM CENTER OF BORE |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66,AISI TO SAE 4150 |
| SFTT | SURFACE TREATMENT | OVERALL ZINC |
| ANTP | BORE STYLE | |
| AJLA | TEETH QUANTITY | 36 |
Supersedes
This item replaces cancelled NIIN 006126874. An older drawing citing one of those numbers resolves here.