NSN 5905-00-831-2953 · NIIN 008312953 · FSC 5905
NO DASHES 5905008312953
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.500 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.00100 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.07300 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAPN | SECTION QUANTITY | 2 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.09300 |
| AEDX | SHAFT STYLE | |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 40.0 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.540 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEGA | LATERAL RUNOUT | INCHES 0.002 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 6 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.521 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.120 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 350.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.70 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -10.0 TO 10.0 |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.042 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 10.000 AND KILOHMS 2ND SECTION 5.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 1ST SECTION -0.10 TO 0.10 AND 2ND SECTION -0.05 TO 0.05 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 2.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.31150 AND INCHES MAXIMUM 1.31200 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.13200 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.172 |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.188 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.315 |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -55 DEG CELSIUS ALL SECTIONS -0.0 TO 10.0 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.709 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.43700 |