NSN 2920-00-393-6371 · NIIN 003936371 · FSC 2920
NO DASHES 2920003936371
In Stock
GENERATOR,ENGINE ACCESSORY
Engine Electrical System Components, Nonaircraft
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.500 |
| ABFF | FURNISHED ITEMS | LOCKWASHER AND NUT AND WOODRUFF KEY |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | INCHES NOMINAL 0.906 |
| CMLL | MOUNTING HOLE THREAD DIAMETER | INCHES NOMINAL 0.312 |
| ABVA | UNTHREADED PORTION LENGTH | INCHES NOMINAL 0.875 |
| ADER | MOUNTING STYLE | |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| AFYS | KEYWAY LENGTH | INCHES NOMINAL 0.750 |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AWDP | THREAD DIAMETER | INCHES NOMINAL 0.669 |
| AXHX | GROUND POLARITY TYPE | NEGATIVE |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1900 |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 18.0 |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 1300 |
| BCGN | GROUNDING METHOD | EXTERNAL |
| ZZZV | FSC APPLICATION DATA | ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | INCHES NOMINAL 3.500 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0 |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 159.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 7.2435 AND INCHES MAXIMUM 7.2565 |
| AAJE | THREAD PITCH DIAMETERS | INCHES 0.6324 TO 0.6365 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.323 AND INCHES MAXIMUM 0.333 |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
| BZRR | THREAD SERIES | UNS |
| BCGS | SHAFT DRIVE END STYLE | |
| ABPT | SECOND STEP DIAMETER | INCHES MINIMUM 0.668 AND INCHES MAXIMUM 0.669 |
| ABRR | KEYWAY WIDTH | INCHES NOMINAL 0.156 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | INCHES MINIMUM 8.118 AND INCHES MAXIMUM 8.131 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| ELEC | VOLTAGE IN VOLTS | 24.0 |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | INCHES NOMINAL 3.625 |