NSN 3020-00-770-7494 · NIIN 007707494 · FSC 3020
NO DASHES 3020007707494
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 29 |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 1.8125 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 60.0 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.5000 |
| AJLA | TEETH QUANTITY | 36 |
| MATT | MATERIAL | OVERALL STEEL COMP 8620 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | SECOND END INCHES 2.067 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 2.531 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.687 |
| CWNH | TOOTH FORM | STANDARD |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 2.165 |
| STYL | STYLE DESIGNATOR | |
| CWTB | COUNTERBORE NOMINAL DEPTH | SECOND END INCHES 0.335 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 2.500 |
| ANTP | BORE STYLE | |
| CWPP | PRESSURE ANGLE | DEGREES 25.0000 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.188 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.875 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.904 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 4.745 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 2.000 |