NSN 5307-00-776-7334 · NIIN 007767334 · FSC 5307
NO DASHES 5307007767334
In Stock
STUD,PLAIN
Studs
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADDU | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | FIRST HOLE INCHES NOMINAL 0.110 |
| AAJE | THREAD PITCH DIAMETERS | STUD THREAD INCHES 0.2894 TO 0.2909 |
| AAJF | THREAD DIRECTION | NUT THREAD RIGHT-HAND |
| AAJF | THREAD DIRECTION | STUD THREAD RIGHT-HAND |
| CQJX | NOMINAL THREAD SIZE | STUD THREAD INCHES 0.312 |
| THSD | THREAD SERIES DESIGNATOR | STUD THREAD UNS |
| ADDV | COTTER PIN HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.065 AND INCHES MAXIMUM 0.072 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AAJD | THREAD CLASS | 3A |
| AASA | THREAD LENGTH | NUT THREAD INCHES MINIMUM 0.560 |
| CQJX | NOMINAL THREAD SIZE | NUT THREAD INCHES 0.312 |
| FEAT | SPECIAL FEATURES | STUD END THREAD 0.003 IN. OVERSIZE |
| MATT | MATERIAL | STEEL COMP 8640 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE SAE |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM |
| THSD | THREAD SERIES DESIGNATOR | NUT THREAD UNF |
| AASA | THREAD LENGTH | STUD THREAD INCHES MINIMUM 0.680 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.500 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | ROCKWELL C MINIMUM 28.0 AND ROCKWELL C MAXIMUM 34.0 |
Supersedes
This item replaces cancelled NIIN 005459173. An older drawing citing one of those numbers resolves here.