NSN 5305-00-993-3152 · NIIN 009933152 · FSC 5305
NO DASHES 5305009933152
In Stock
SCREW,CAP,SOCKET HEAD
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQHQ | MINIMUM YIELD STRENGTH | POUNDS PER SQUARE INCH 30000 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | TYPE 6 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL B MINIMUM 80.0 |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY CONDITION A |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ABQZ | INTERNAL DRIVE STYLE | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81348-FF-S-86 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.156 AND INCHES MAXIMUM 0.159 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 80000 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL |
| MATT | MATERIAL | OVERALL STEEL COMP 304 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.303 AND INCHES MAXIMUM 0.313 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| AASA | THREAD LENGTH | INCHES MAXIMUM 1.000 |
| AASB | FASTENER LENGTH | INCHES MAXIMUM 1.000 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.185 AND INCHES MAXIMUM 0.190 |
Supersedes
This item replaces cancelled NIIN 009998779. An older drawing citing one of those numbers resolves here.