NSN 5990-00-934-3145 · NIIN 009343145 · FSC 5990
NO DASHES 5990009343145
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 6.27 |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | INPUT 40.00 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 50.00 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.185 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.9540 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 12 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 0.8750 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.4940 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 1.4370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1870 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5000 |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 23.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 1000.0 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 4.30 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 1.2000 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2840 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | NOMINAL 0.02 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.000 |
| AKAN | SHAFT THREAD CLASS | 2A |
| AJVM | SPLINE TOOTH QUANTITY | 21 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| CQTM | TERMINAL LOCATION | REAR |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1200 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
Supersedes
This item replaces cancelled NIIN 009954651. An older drawing citing one of those numbers resolves here.