NSN 6105-01-122-0605 · NIIN 011220605 · FSC 6105
NO DASHES 6105011220605
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 6.500 |
| AAJU | OVERALL LENGTH | INCHES 13.375 |
| AAJV | OVERALL WIDTH | INCHES 6.500 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES MINIMUM 0.124 AND INCHES MAXIMUM 0.125 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.081 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.499 AND INCHES MAXIMUM 0.500 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 2.3750 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | SPRAY TIGHT |
| ANTN | SPECIFIC USE | FAN,VANEAXIAL MODELS 768-7853; 768-7854; 768-7855 |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | NONVENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | FOOT-POUNDS STALLED 0.145 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.2000 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 2.812 |
| CWDY | TEMP RATING | OPERATING CELSIUS 50.0 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 3.750 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1750.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 2.500 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A9 AND SECOND STYLE A1 |
| FAAZ | PHASE | INPUT SINGLE |
| FEAT | SPECIAL FEATURES | SHAFT STYLE A1 0.659 IN. MIN. 0.661 IN. MAX DIA; SHAFT STYLE A9 HAS 0.500-13 UNC EXTERNAL THREAD 0.812 IN. LONG WITH 0.125 IN. DIA DRILL THRU HOLE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
Supersedes
This item replaces cancelled NIINs 014400323 · 010302738. An older drawing citing one of those numbers resolves here.