NSN 6680-00-798-3213 · NIIN 007983213 · FSC 6680
NO DASHES 6680007983213
In Stock
SHAFT ASSEMBLY,FLEXIBLE
Liquid and Gas Flow, Liquid Level, and Mechanical Motion Measuring Instruments
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| CGDN | MINIMUM OPERATING RADIUS | INCHES 5.000 |
| FEAT | SPECIAL FEATURES | COUNTERCLOCKWISE CORE ROTATION DIRECTION |
| MATT | MATERIAL | CASING RUBBER AND STEEL |
| MATT | MATERIAL | CORE STEEL |
| SCSZ | CROSS SECTION SIZE | ACROSS FLATS SECOND END INCHES MINIMUM 0.101 AND INCHES MAXIMUM 0.104 |
| CFRP | CASING LENGTH BETWEEN FERRULES | INCHES MINIMUM 107.437 AND INCHES MAXIMUM 107.562 |
| CFRQ | CASING OUTSIDE DIAMETER | INCHES MINIMUM 0.300 AND INCHES MAXIMUM 0.500 |
| AAJD | THREAD CLASS | 2B |
| AWZY | END CONNECTION TYPE | BOTH ENDS THREADED INTERNAL |
| CFRR | CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER OR RUBBER COVER |
| CFRX | OVERALL END SIZE | FIRST END: 1.188 IN. W; SECOND END: 0.875 IN. W |
| CFRZ | CORE OVERALL LENGTH | INCHES MINIMUM 108.547 AND INCHES MAXIMUM 108.859 |
| ASDB | WIDTH ACROSS FLATS | FIRST END INCHES NOMINAL 1.000 |
| ASDB | WIDTH ACROSS FLATS | SECOND END INCHES NOMINAL 0.750 |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| BPPL | WRENCHING FACILITY TYPE | BOTH ENDS HEXAGON |
| APJC | THREAD LOCATION | BOTH ENDS INTERNAL |
| APTD | END TYPE | FIRST END ROUND KEYED |
| APTD | END TYPE | SECOND END SQUARE MALE |
| AKMH | CORE DIAMETER | INCHES NOMINAL 0.150 |
| ANQR | PROTECTIVE COATING METHOD | CORE COATED |
| SCSZ | CROSS SECTION SIZE | DIAMETER FIRST END INCHES MINIMUM 0.150 AND INCHES MAXIMUM 0.153 |
| SFTT | SURFACE TREATMENT | CORE ZINC |
| ZZZV | FSC APPLICATION DATA | SPEEDOMETER,TANK,90-MM GUN |
| AEDN | TIP LENGTH | SECOND END INCHES MINIMUM 0.950 AND INCHES MAXIMUM 1.010 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | FIRST END UNS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | SECOND END UNF |
| AECT | THREAD DEPTH | SECOND END INCHES NOMINAL 0.375 |
| AEDN | TIP LENGTH | FIRST END INCHES MINIMUM 1.018 AND INCHES MAXIMUM 1.022 |
| AECT | THREAD DEPTH | FIRST END INCHES NOMINAL 0.327 |
| AAJF | THREAD DIRECTION | BOTH ENDS RIGHT-HAND |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 108.578 AND INCHES MAXIMUM 108.891 |
Supersedes
This item replaces cancelled NIIN 012804367. An older drawing citing one of those numbers resolves here.