NSN 3020-00-274-4499 · NIIN 002744499 · FSC 3020
NO DASHES 3020002744499
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 6 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 63.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 7.541 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 7.2980 |
| AJLA | TEETH QUANTITY | 45 |
| STYL | STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.615 |
| CWWH | END NOMINAL LENGTH | SECOND END INCHES 0.153 |
| CWWN | END NOMINAL DIAMETER | SECOND END INCHES 3.125 |
| CWWS | FIRST STEP NOMINAL LENGTH | SECOND END INCHES 0.409 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWXB | FIRST STEP NOMINAL DIAMETER | SECOND END INCHES 2.615 |
| CWNH | TOOTH FORM | STANDARD |
| CWTR | HUB STYLE DESIGNATOR | |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624 |
| ANTP | BORE STYLE | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.562 |
| MATT | MATERIAL | OVERALL STEEL |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | SECOND END INCHES 0.109 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.219 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.991 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.734 |
Supersedes
This item replaces cancelled NIIN 004230799. An older drawing citing one of those numbers resolves here.