NSN 4720-01-185-4349 · NIIN 011854349 · FSC 4720
NO DASHES 4720011854349
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.500 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 200.0 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.265 |
| ABKU | FLANGE THICKNESS | SECOND END INCHES NOMINAL 0.265 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.970 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 7.000 |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 240.0 |
| AEPR | FLANGE OUTSIDE DIAMETER | SECOND END INCHES NOMINAL 1.500 |
| AEPR | FLANGE OUTSIDE DIAMETER | FIRST END INCHES NOMINAL 1.500 |
| AHNC | CONNECTION STYLE | |
| AKUT | END FLANGE CONSTRUCTION | SECOND END SOLID |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| AKUU | END CONNECTION DESIGN | FIRST END ELBOW |
| AWLS | CONNECTION TYPE | FIRST END PLAIN FACE FLANGE |
| AWLS | CONNECTION TYPE | SECOND END PLAIN FACE FLANGE |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 14000.0 |
| CQQF | OPERATING PRESSURE | SINGLE RESPONSE POUNDS PER SQUARE INCH (PSI) MAXIMUM 3500 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 7000.0 |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CRFY | FLOW ANGLE | FIRST END DEGREES 45.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND WEATHERPROOF |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 26.000 |
| CTCJ | FLANGE STYLE | |
| MEDA | MEDIA FOR WHICH DESIGNED | SINGLE RESPONSE FUEL/OIL, HYDROCARBON |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED STEEL WIRE |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |