NSN 5305-00-124-3086 · NIIN 001243086 · FSC 5305
NO DASHES 5305001243086
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASA | THREAD LENGTH | INCHES MINIMUM 0.251 AND INCHES MAXIMUM 0.301 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.265 AND INCHES MAXIMUM 0.270 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.088 AND INCHES MAXIMUM 0.102 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1625 AND INCHES MAXIMUM 0.1635 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.164 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.740 AND INCHES MAXIMUM 0.760 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 36.0 AND ROCKWELL C MAXIMUM 40.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| THSD | THREAD SERIES DESIGNATOR | UNJC |
| ZZZK | SPECIFICATION/STANDARD DATA | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD 80205-NAS1122 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416,TYE 2,CLASS 2 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-5626 OR MIL SPEC 2ND MATERIAL RESPONSE -IL-S-5000 OR MIL SPEC 3RD MATERIAL RESPONSE -IL-S-6049 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.011 AND INCHES MAXIMUM 1.041 |
| AASK | HEAD STYLE | |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 |