NSN 5962-01-113-7052 · NIIN 011137052 · FSC 5962
NO DASHES 5962011137052
In Stock
MICROCIRCUIT,LINEAR
Microcircuits, Electronic
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.840 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.310 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.140 AND INCHES MAXIMUM 0.185 |
| AEHX | MAXIMUM POWER DISSIPATION RATING | WATTS 1.0 |
| AFGA | OPERATING TEMP RANGE | CELSIUS 0.0 TO 70.0 |
| AFJQ | STORAGE TEMP RANGE | CELSIUS -65.0 TO 150.0 |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND W/ENABLE |
| CQSJ | INCLOSURE MATERIAL | CERAMIC |
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| CQZP | INPUT CIRCUIT PATTERN | 7 INPUT |
| CSSL | DESIGN FUNCTION AND QUANTITY | FILTER, ACTIVE 1 AND LIMITER 1 |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | MIL-M-38510 D-2 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CZEN | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | VOLTS MAXIMUM POWER SOURCE 14.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 13973-839199 |
| TTQY | TERMINAL TYPE AND QUANTITY | PRINTED CIRCUIT 16 |
Supersedes
This item replaces cancelled NIIN 011293849. An older drawing citing one of those numbers resolves here.