NSN 6105-01-186-1692 · NIIN 011861692 · FSC 6105
NO DASHES 6105011861692
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 9.880 |
| AAJU | OVERALL LENGTH | INCHES 16.500 |
| AAJV | OVERALL WIDTH | INCHES 12.310 |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.880 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.190 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.095 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.625 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 2.120 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | FAN COOLED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| BTBY | SHAFT END STYLE | |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CNMM | FRAME SIZE DESIGNATION | 184TNZ |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 3.000 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.625 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 3.500 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 4.485 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 5.500 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 50.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 3600.0 AND SINGLE FULL LOAD 3510.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 7.500 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 4.100 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| FAAZ | PHASE | INPUT THREE |
| FEAT | SPECIAL FEATURES | SHAFT END FIRST STYLE HAS 0.190 IN. DRILL THRU HOLE; SECOND STYLE 0.750 IN. DIA |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNIFIED NATIONAL COARSE (UNC) |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDERLESS LUG 3 |
Supersedes
This item replaces cancelled NIIN 010542347. An older drawing citing one of those numbers resolves here.