NSN 6105-01-658-6041 · NIIN 016586041 · FSC 6105
NO DASHES 6105016586041
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Application: MOTOR, AC 2.0
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWFX | ROTOR SPEED RATING IN RPM | HIGH FULL LOAD 870.0 |
| AAJU | OVERALL LENGTH | INCHES 18.81 |
| AGAV | END ITEM IDENTIFICATION | MOTOR, AC 2.0 |
| AKCT | SHAFT ROTATION DIRECTION | FIRST END CLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | GENERAL PURPOSE |
| FAAZ | PHASE | OUTPUT TWO |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | MOTER |
| AXGY | MOUNTING METHOD | FLANGE |
| AAJV | OVERALL WIDTH | INCHES 10.50 |
| AAJT | OVERALL HEIGHT | INCHES 11.25 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 2 |
| BFMF | COOLING METHOD | FAN COOLED |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | OUTPUT LINE TO LINE HIGH 440.0 |
| CWHZ | SHAFT END CHARACTERISTIC | IDENTICAL ENDS SINGLE STYLE N0.17 |
| AXCP | WINDING TYPE | SERIES WOUND |
| CWCS | LENGTH OF SHAFT FROM HOUSING | FIRST END INCHES 0.75 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 4.25 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SECOND END INCHES 3.12 |
Supersedes
This item replaces cancelled NIIN 015306972. An older drawing citing one of those numbers resolves here.