NSN 6105-01-656-4783 · NIIN 016564783 · FSC 6105
NO DASHES 6105016564783
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Application: MOTOR, A.C.
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 4.06 |
| CNMM | FRAME SIZE DESIGNATION | 256TN |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1770.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 18.3 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO LINE SINGLE 440.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | MOTOR, A.C. |
| FAAZ | PHASE | INPUT THREE |
| AAJT | OVERALL HEIGHT | INCHES 13.25 |
| AAJU | OVERALL LENGTH | INCHES 24.56 |
| AAJV | OVERALL WIDTH | INCHES 13.00 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES MINIMUM 0.375 AND INCHES MAXIMUM 0.377 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES MINIMUM 2.86 AND INCHES MAXIMUM 2.88 |
| AGAV | END ITEM IDENTIFICATION | MOTOR, A.C. |
| AKPS | DUTY CYCLE | CONTINUOUS |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 6.25 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 10.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 10.0 |
| BFMF | COOLING METHOD | FAN COOLED |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |
| BKPB | CURRENT RATING METHOD | LOAD |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |