NSN 6105-01-153-8864 · NIIN 011538864 · FSC 6105
NO DASHES 6105011538864
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 14.750 |
| AAJU | OVERALL LENGTH | INCHES 25.125 |
| AAJV | OVERALL WIDTH | INCHES 15.060 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.5000 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.2500 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 1.874 AND INCHES MAXIMUM 1.875 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 3.2500 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | SYNCHRONOUS |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | FAN COOLED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNMM | FRAME SIZE DESIGNATION | 286TN |
| CNXS | POWER RATING | INPUT HORSEPOWER 7.500 OR HORSEPOWER 15.000 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 4.700 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 7.000 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 11.000 |
| CWFX | ROTOR SPEED RATING IN RPM | FIRST MULTIPLE FULL LOAD 900.0 OR SECOND MULTIPLE FULL LOAD 1800.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 11.000 |
| CWGL | CURRENT RATING IN AMPS | INPUT FIRST MULTIPLE 20.000 OR SECOND MULTIPLE 20.600 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A9 AND SECOND STYLE A1 |
| FAAZ | PHASE | INPUT THREE |
| FEAT | SPECIAL FEATURES | SHAFT END SECOND STYLE 1.877 IN. MIN DIA. 1.881 IN. MAX DIA |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 9 |