NSN 5340-01-031-7057 · NIIN 010317057 · FSC 5340
NO DASHES 5340010317057
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
13 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | UNTHREADED ROUND |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT AND WEATHER RESISTANT |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABMZ | DIAMETER | INCHES NOMINAL 0.204 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.058 AND INCHES MAXIMUM 0.068 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 1.499 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES MINIMUM 1.702 AND INCHES MAXIMUM 1.732 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 1.985 AND INCHES MAXIMUM 2.015 |
| MATT | MATERIAL | CUSHION PLASTIC POLYTETRAFLUOROETHYLENE |
| MATT | MATERIAL | BAND ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND FED SPEC SINGLE MATERIAL RESPONSE QQ-A-25015T4 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION FED SPEC SINGLE MATERIAL RESPONSE L--403 |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 009894581. An older drawing citing one of those numbers resolves here.