NSN 5310-01-082-2060 · NIIN 010822060 · FSC 5310
NO DASHES 5310010822060
In Stock
NUT,SELF-LOCKING,HEXAGON
Nuts and Washers
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| ACTA | NUT STYLE | |
| ADEA | NUT HEIGHT | INCHES MINIMUM 0.435 AND INCHES MAXIMUM 0.469 |
| ASDB | WIDTH ACROSS FLATS | INCHES MINIMUM 0.679 AND INCHES MAXIMUM 0.690 |
| AZKQ | TEMP RATING | FAHRENHEIT MAXIMUM 250.0 |
| BZRR | THREAD SERIES | UNIFIED NATIONAL COARSE (UNC) |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.438 |
| CRSQ | COUNTERSINK ANGLE | NUT DEGREES MINIMUM 88.0 |
| CRTM | BEARING SURFACE TYPE | CHAMFERED |
| MATT | MATERIAL | NUT STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 |
| MATT | MATERIAL | LOCKING INSERT PLASTIC POLYHEXAMETHYLENE AMIDE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NUT FED STD ALL MATERIAL RESPONSES 66 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | LOCKING INSERT MIL SPEC SINGLE MATERIAL RESPONSE -IL---20693,CO- A,TYE 1 |
| SFTT | SURFACE TREATMENT | NUT PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NUT FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
Supersedes
This item replaces cancelled NIIN 013790039. An older drawing citing one of those numbers resolves here.