NSN 3130-01-246-8487 · NIIN 012468487 · FSC 3130
NO DASHES 3130012468487
In Stock
BEARING UNIT,ROLLER
Bearings, Mounted
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | INCHES NOMINAL 0.875 |
| ABVG | MOUNTING SLOT LENGTH | INCHES NOMINAL 1.625 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 3.4375 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 1.875 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES NOMINAL 10.000 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 7.406 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 13.187 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | INCHES NOMINAL 3.437 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 5.187 |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | CLOSED |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | ONE END |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES MINIMUM 3.745 AND INCHES MAXIMUM 3.755 |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 30.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | ECCENTRIC CAM LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| FEAT | SPECIAL FEATURES | CAP SEAL ONE END; PIPE SEALANT ON CAP SEAL THREADS; 100 PCT GREASE FILL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | BEARING STEEL |
| MATT | MATERIAL | HOUSING STEEL |
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | HOUSING EXCLUDING BORE PAINT |
| STYL | STYLE DESIGNATOR |