NSN 5990-00-402-1714 · NIIN 004021714 · FSC 5990
NO DASHES 5990004021714
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS MAXIMUM 1.0 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 300.0 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 4.90 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 25.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | OUTPUT TO INPUT NOMINAL 4.000 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -10.0 TO 10.0 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 15.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 7.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 24.00 |
| AJSL | BODY SIZE | 11 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6000 |
| CQRG | BODY MATERIAL | ALUMINUM |
| CQTM | TERMINAL LOCATION | SIDE |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 150.00 |
| CQZS | SHAFT SLOT DEPTH | BOTH SHAFTS INCHES MINIMUM 0.0210 AND INCHES MAXIMUM 0.0310 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 25.00 |
| CRHN | SHAFT SLOT WIDTH | BOTH SHAFTS INCHES MINIMUM 0.0200 AND INCHES MAXIMUM 0.0300 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 12.00 |
| CRSJ | SHAFT TYPE | BOTH SHAFTS ROUND, SLOTTED |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| ABWV | SHAFT DIAMETER | REAR SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| ABXF | SHAFT LENGTH | FRONT SHAFT INCHES NOMINAL 0.2810 |
| ABXF | SHAFT LENGTH | REAR SHAFT INCHES NOMINAL 0.2440 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | FRONT SHAFT INCHES MINIMUM 0.1195 AND INCHES MAXIMUM 0.1200 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0810 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.1250 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0590 AND INCHES MAXIMUM 1.0620 |