NSN 5935-00-518-3442 · NIIN 005183442 · FSC 5935
NO DASHES 5935005183442
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFQW | MATING END QUANTITY | 1 |
| AKMG | NOMINAL THREAD LENGTH | INCHES 0.290 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQJX | NOMINAL THREAD SIZE | INCHES 1.062 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END SINGLE CONTACT GROUPING BACK |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-26482 |
| THSD | THREAD SERIES DESIGNATOR | UNEF |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906--S3472 |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SINGLE MATING END SINGLE CONTACT GROUPING MIL SPEC SINGLE TREATMENT RESPONSE -IL-G-45204,TY 2 CLASS 1 |
| AFRV | CONNECTOR LOCKING METHOD | BAYONET PIN |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY |
| CTHH | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-367 |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END SINGLE CONTACT GROUPING REMOVABLE |
| AFRN | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| AFRP | INSERT POSITION IN DEG | 0.0 |
| AFRT | SHELL TYPE | SOLID |
| PRMT | PRECIOUS MATERIAL | GOLD |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES MINIMUM 1.198 AND INCHES MAXIMUM 1.208 |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END SINGLE CONTACT GROUPING GOLD |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES MINIMUM 0.462 AND INCHES MAXIMUM 0.493 |
| AFQR | THREADED DEVICE TYPE | BACK SHELL |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.145 AND INCHES MAXIMUM 0.155 |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 1.532 |
| CXCG | INCLUDED CONTACT QUANTITY | 32 |
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END SINGLE CONTACT GROUPING ROUND SOCKET |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.032 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.405 |
| CSCF | TERMINAL TYPE | SINGLE MATING END SINGLE CONTACT GROUPING CRIMP |
| AAJD | THREAD CLASS | 2A |
| AAQL | BODY STYLE | |
| ADZC | ENVIRONMENTAL PROTECTION | SALT WATER RESISTANT AND MOISTURE RESISTANT AND VIBRATION RESISTANT |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 1.532 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES MINIMUM 1.198 AND INCHES MAXIMUM 1.208 |
Supersedes
This item replaces cancelled NIIN 010680977. An older drawing citing one of those numbers resolves here.