NSN 5905-00-688-9844 · NIIN 006889844 · FSC 5905
NO DASHES 5905006889844
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.810 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.812 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 8.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -3.0 TO 3.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| BYDT | BEARING TYPE | SHAFT SLEEVE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 100.000 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AAQL | BODY STYLE | |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 3600.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.10 TO 0.10 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 105.0 |
| CQPH | DEVICE DESIGN TYPE | AT 6:00 OCLOCK |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| AEFY | SHAFT END PLAY | INCHES 0.00800 |
| AEFZ | SHAFT RUNOUT | INCHES 0.002 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.002 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.25 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 1000.00 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.75 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 3600.0 |
| AEDX | SHAFT STYLE | |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 2.218 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.997 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.813 |
Supersedes
This item replaces cancelled NIIN 007581569. An older drawing citing one of those numbers resolves here.