NSN 3010-01-088-2252 · NIIN 010882252 · FSC 3010
NO DASHES 3010010882252
In Stock
GEARCASE-MOTOR
Torque Converters and Speed Changers
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 3.310 |
| AAJU | OVERALL LENGTH | INCHES 8.560 |
| AAJV | OVERALL WIDTH | INCHES 3.310 |
| ABWV | SHAFT DIAMETER | FIRST END INCHES MINIMUM 0.312 AND INCHES MAXIMUM 0.313 |
| ABWV | SHAFT DIAMETER | SECOND END INCHES NOMINAL 0.500 |
| ACDC | CURRENT TYPE | INPUT AC |
| AGRB | FLAT DEPTH | FIRST END INCHES NOMINAL 0.031 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | INTERMITTENT |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | SYNCHRONOUS |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BFLT | TIME INTERVAL | MINUTES MAXIMUM ON 1.0 AND MINUTES MINIMUM OFF 10.0 |
| BFLY | GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | SINGLE END INLINE W/ARMATURE |
| BFMF | COOLING METHOD | NONVENTILATED |
| BFMR | KEYWAY CENTER TO SHAFT END DISTANCE | SECOND END INCHES NOMINAL 0.750 |
| BKPH | TORQUE RATING AND TYPE | FOOT-POUNDS STARTING 1.5 |
| BKPP | SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC MECHANICAL |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| CNMK | WOODRUFF KEY SIZE DESIGNATION | 3 |
| CNXS | POWER RATING | OUTPUT WATTS 320.0000 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | FIRST END INCHES 0.500 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SECOND END INCHES 1.500 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 1.690 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 1.250 |
| CWDY | TEMP RATING | OPERATING CELSIUS 0.0 AND OPERATING CELSIUS 70.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.630 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO LINE FIRST MULTIPLE 115.0 OR LINE TO LINE SECOND MULTIPLE 200.0 |
| CWHK | GEARED HEAD OUTPUT SHAFT SPEED RATING | SINGLE END SINGLE REVOLUTIONS PER MINUTE 60.000 |
| CWHZ | SHAFT END CHARACTERISTIC | FIRST END SINGLE STYLE A5 |
| CWHZ | SHAFT END CHARACTERISTIC | SECOND END SINGLE STYLE A11 |
| FAAZ | PHASE | INPUT THREE |
| FEAT | SPECIAL FEATURES | SHAFT END FIRST END STYE A5,EXCEPT ADDITIONAL FLAT AT 90 DEG,SAME DIM. |
| FREQ | FREQUENCY IN HERTZ | 400.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 4 |