NSN 3020-00-511-1752 · NIIN 005111752 · FSC 3020
NO DASHES 3020005111752
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRS | BORE NOMINAL DIAMETER | FIRST END INCHES 1.562 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 4.897 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.934 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 5.188 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.750 |
| AJLA | TEETH QUANTITY | 22 |
| ANTP | BORE STYLE | |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQD | PITCH ANGLE | DEGREES 42.6167 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 24.0 AND ROCKWELL C MAXIMUM 29.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 1035 |
| STYL | STYLE DESIGNATOR | |
| CWTR | HUB STYLE DESIGNATOR | |
| BDYK | SERRATION PITCH DIAMETER | SECOND END INCHES NOMINAL 1.0960 |
| CBBL | FEATURES PROVIDED | STRAIGHT TEETH |
| AAQL | BODY STYLE | |
| ADDW | SERRATION QUANTITY | 48 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.7500 |
| CWXB | FIRST STEP NOMINAL DIAMETER | SECOND END INCHES 1.874 |
| FEAT | SPECIAL FEATURES | HUB IS PARTIALLY THREADED,1-9/16-18 3A,0.625 IN. LENGTH,1.688 IN. FROM END |
| CWWN | END NOMINAL DIAMETER | SECOND END INCHES 1.594 |
| CWWS | FIRST STEP NOMINAL LENGTH | SECOND END INCHES 1.876 |
| CWWH | END NOMINAL LENGTH | SECOND END INCHES 2.500 |
Supersedes
This item replaces cancelled NIIN 003635851. An older drawing citing one of those numbers resolves here.